R2511-HP MSR Router Series Terminal Access Command Reference(V5)

32
Usage guidelines
You cannot modify the screen display size for terminals that have established connections.
Examples
# On RTA template temp1, set the screen to display up to 25 lines and 132 columns of characters.
<Sysname> system-view
[Sysname] rta template temp1
[Sysname-rta-template-temp1] screen-size height 25 width 132
sendbuf bufsize
Use sendbuf bufsize to configure the maximum size of data to be sent to the terminal.
Use undo sendbuf bufsize to restore the default.
Syntax
sendbuf bufsize size
undo sendbuf bufsize
Default
The maximum size of data to be sent to the terminal at one time is 500 bytes.
Views
Terminal template view
Default command level
2: System level
Parameters
size: Sets the maximum size of data sent to the terminal at one time, in the range of 2 to 500 bytes.
Usage guidelines
The router sends data in packets to the terminal. The sizes of the sent packets are different. Use the size
argument to specify the maximum data packet size.
Examples
# Configure the maximum size of data to be sent at one time as 200 bytes.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] sendbuf bufsize 200
sendbuf threshold
Use sendbuf threshold to set the threshold of the terminal send buffer.
Use undo sendbuf threshold to cancel the configured threshold of the terminal send buffer.
Syntax
sendbuf threshold value
undo sendbuf threshold