R2511-HP MSR Router Series Terminal Access Command Reference(V5)

36
Default command level
2: System level
Usage guidelines
If the template has been applied on the corresponding interface, the configurations made in template
view will take effect after the update changed-config command is executed. HP recommends you
complete all terminal template configurations before applying the template on the interface.
Executing this command will disconnect connections. Make sure critical services will not be affected.
Some configurations, such as source IP address configuration and encryption, take effect only after they
are updated and the connection is re-established.
Examples
# Set the menu hotkey under the template and update the configuration.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] menu hotkey 1
[Sysname-rta-template-abc] update changed-config
vty description
Use vty description to configure a description for a VTY.
Use undo vty description to remove the description for a VTY.
Syntax
vty vty-number description string
undo vty vty-number description
Default
No description is configured for a VTY.
Views
Terminal template view
Default command level
2: System level
Parameters
vty-number: Specifies a VTY by its number, in the range of 0 to 7.
string: Configures a description for the VTY, a string of 1 to 31 characters.
Usage guidelines
For a VTY of a service, you can use the service name as the description information of the VTY.
Examples
# Set the description information of VTY 1 to chuxu.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 description chuxu