R2511-HP MSR Router Series Terminal Access Command Reference(V5)

37
vty etelnet remote
Use vty etelnet remote to create a VTY for ETelnet terminal access.
Use undo vty to remove the specified VTY.
Syntax
vty vty-number etelnet remote ip-address [ port-number ] [ source source-ip ]
undo vty vty-number
Views
Terminal template view
Default command level
2: System level
Parameters
vty-number: Specifies a VTY by number, in the range of 0 to 7.
ip-address: Specifies the FEP IP address.
port-number: Specifies the listening port of the ccbtelnetd program on the FEP, in the range of 1 to 50000.
The default is 2080.
source source-ip: Specifies the source IP address.
Example
# Create a VTY for ETelnet terminal access, setting the FEP IP address to 1.1.1.1, listening port to 9010, and
source IP address to 2.2.2.2.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 etelnet remote 1.1.1.1 9010 source 2.2.2.2
vty hotkey
Use vty hotkey to set the hotkey for VTY fast switching.
Use undo vty hotkey to cancel the hotkey configured.
Syntax
vty vty-number hotkey ascii-code&<1-3>
undo vty vty-number hotkey
Default
No hotkey is configured for VTY fast switching.
Views
Terminal template view
Default command level
2: System level
Parameters
vty-number: Specifies a VTY by number, in the range of 0 to 7.