R2511-HP MSR Router Series Terminal Access Command Reference(V5)

46
[Sysname-rta-template-abc] vty-switch priority
vty-switch threshold
Use vty-switch threshold to configure the threshold for VTY automatic switching.
Use undo vty-switch threshold to restore the default.
Syntax
vty-switch threshold times
undo vty-switch threshold
Default
No threshold is configured; that is, no switching is performed.
Views
Terminal template view
Default command level
2: System level
Parameters
times: Specifies the threshold for VTY automatic switching, in the range of 1 to 10000 times.
Usage guidelines
This command takes effect only in RTC client terminal access. After this configuration, an RTC client first
initiates a connection to the RTC server with the lowest VTY number. If the number of connection failures
exceeds the threshold, the RTC client initiates a connection to the RTC server with the second lowest VTY
number, and so on.
Examples
# Set the threshold for automatic VTY switching.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty-switch threshold 5