R2511-HP MSR Router Series Terminal Access Command Reference(V5)

47
IP terminal access configuration commands
authentication-mode
Use authentication-mode to set IP terminal access authentication for a service.
Syntax
authentication-mode { none | password | scheme }
Default
No IP terminal access authentication is configured for a service.
Views
IP terminal access service view
Default command level
2: System level
Parameters
none: No authentication.
password: Password authentication.
scheme: AAA scheme authentication.
Usage guidelines
The setting can be configured while the service is running but does not take effect until the next login.
Examples
# Set the password authentication mode for the cunkuan service.
<Sysname> system-view
[Sysname] ipta service cunkuan
[Sysname-ipta-service-cunkuan] authentication-mode password
# Set the AAA scheme authentication mode for the cunkuan service.
<Sysname> system-view
[Sysname] ipta service cunkuan
[Sysname-ipta-service-cunkuan] authentication-mode scheme
Related commands
set authentication password
bind vpn-instance
Use bind vpn-instance to bind a VPN instance to a terminal.
Use undo bind vpn-instance to remove the binding.
Syntax
bind vpn-instance vpn-name