R2511-HP MSR Router Series Terminal Access Command Reference(V5)

50
Table 9 Command output
Field Descri
p
tion
transform enter Both CR and CRLF are transformed to CRLF.
# Display IP terminal access statistics about the cunkuan service.
<Sysname> display ipta statistics service cunkuan
Service name : cunkuan
Total:
From Terminal: 0(Bytes) 0(Packets) (Last Time)00:00:00
To Terminal: 0(Bytes) 0(Packets) (Last Time)00:00:00
From Server: 0(Bytes) 0(Packets) (Last Time)00:00:00
To Server: 0(Bytes) 0(Packets) (Last Time)00:00:00
TTY-ID = 41 IP = 192.168.0.168
From Terminal: 0(Bytes) 0(Packets) (Last Time)00:00:00
To Terminal: 0(Bytes) 0(Packets) (Last Time)00:00:00
From Server: 0(Bytes) 0(Packets) (Last Time)00:00:00
To Server: 0(Bytes) 0(Packets) (Last Time)00:00:00
TTY-ID = 43 IP = 192.168.0.167
From Terminal: 0(Bytes) 0(Packets) (Last Time)00:00:00
To Terminal: 0(Bytes) 0(Packets) (Last Time)00:00:00
From Server: 0(Bytes) 0(Packets) (Last Time)00:00:00
To Server: 0(Bytes) 0(Packets) (Last Time)00:00:00
encryption algorithm
Use encryption algorithm to enable data encryption using the specified encryption algorithm.
Use undo encryption algorithm to restore the default.
Syntax
encryption algorithm { aes | quick }
undo encryption algorithm
Default
Data encryption is not enabled.
Views
IP terminal access service view
Default command level
2: System level
Parameters
aes: Specifies the AES 128-bit encryption algorithm.
quick: Specifies the quick encryption algorithm, a proprietary algorithm.
Usage guidelines
This command only affects newly established connections.
This command only applies to TTY terminal access.