R2511-HP MSR Router Series Terminal Access Command Reference(V5)

53
Views
System view
Default command level
2: System level
Parameters
mac-address interface interface-type interface-number: Uses the MAC address of the specified interface
for authentication.
string string: Uses the specified string of 1 to 30 characters for authentication.
Usage guidelines
During authentication, the router sends the specified MAC address or string to the server, which
compares it with the locally configured one. If they match, the router passes the authentication. If not, the
server disconnects from the router.
This command only applies to TTY terminal access.
Examples
# Use the MAC address of Ethernet 1/1 for authentication.
<Sysname> system-view
[Sysname] ipta bind mac-address interface ethernet 1/1
Info: The configuration will be valid only when service type is TTY.
# Use the string abc for authentication.
<Sysname> system-view
[Sysname] ipta bind string abc
Info: The configuration will be valid only when service type is TTY.
ipta bind vpn-instance
Use ipta bind vpn-instance to bind terminals to a VPN.
Use undo ipta bind vpn-instance to remove the binding.
Syntax
ipta bind vpn-instance vpn-name terminal ttyid-list
undo ipta bind vpn-instance terminal ttyid-list
Default
No terminal-VPN binding is configured.
Views
System view
Default command level
2: System level
Parameters
vpn-name: Specifies an MPLS L3VPN by its name, a case sensitive string of 1 to 31 characters.
ttyid-list: Specifies up to 10 lists of terminals. A ttyid is a terminal number in the range of 0 to 255.