R2511-HP MSR Router Series Terminal Access Command Reference(V5)

1
Terminal access configuration commands
NOTE:
The HP MSR900, and MSR93X (except the JG514A, JG515A and JG531A) routers do not support
interface modules and thus cannot provide terminal access through an asynchronous serial port module.
auto-close
Use auto-close to enable automatic link teardown and set the automatic link teardown time.
Use undo auto-close to restore the default.
Syntax
auto-close time
undo auto-close
Default
The automatic link teardown function is disabled and the automatic link teardown time is 0.
Views
Terminal template view
Default command level
2: System level
Parameters
time: Automatic link teardown time, in seconds. It ranges from 5 to 240.
Usage guidelines
When the automatic link teardown function is enabled, if a terminal is disconnected from the router, the
router sets the terminal to DOWN state, and will tear down the TCP connection to the front-end processor
(FEP) after the specified time period. If the function is disabled, the TCP connection will never be torn
down.
Examples
# Set the automatic link teardown time to 10 seconds.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] auto-close 10
auto-link
Use auto-link to configure the automatic link establishment time.
Use undo auto-link to restore the default.
Syntax
auto-link time