R2511-HP MSR Router Series Terminal Access Command Reference(V5)

55
ipta lock-key
Use ipta lock-key to specify IP terminal lock hotkeys.
Use undo ipta lock-key to remove all IP terminal lock hotkeys
Syntax
ipta lock-key ascii-code&<1-3>
undo ipta lock-key
Default
No IP terminal lock hotkeys are set.
Views
System view
Default command level
2: System level
Parameters
ascii-code&<1-3>: Specifies the ASCII value of a terminal lock hotkey, in the range of 0 to 255. The
&<1-3> means that you can specify up to three terminal lock hotkeys.
Usage guidelines
The specified IP terminal lock hotkeys cannot be identical to other hotkeys on the router and the server to
avoid conflicts. For example, do not use hotkeys 17 and 19, which are flow control hotkeys of Linux.
The specified IP terminal lock hotkeys are not effective for terminals using a service that has been
configured with the none authentication mode.
Examples
# Configure lock hotkey 27 for all terminals.
<Sysname> system-view
[Sysname] ipta lock-key 27
Related commands
authentication-mode
ipta server enable
Use ipta server enable to enable IP terminal access.
Use undo ipta server enable to disable IP terminal access.
Syntax
ipta server enable
undo ipta server enable
Views
System view
Default command level
2: System level