R2511-HP MSR Router Series Terminal Access Command Reference(V5)

58
Syntax
ipta terminal-tcp recvbuf-size recvsize
undo ipta terminal-tcp recvbuf-size
Default
The size of the TCP receive buffer for each terminal connection is 2048 bytes.
Views
System view
Default command level
2: System level
Parameters
recvsize: Specifies the size of the TCP receive buffer, in the range of 512 to 16384 bytes.
Examples
# Configure the TCP receive buffer size for each terminal connection as 512 bytes.
<Sysname> system-view
[Sysname] ipta terminal-tcp recvbuf-size 512
ipta terminal-tcp sendbuf-size
Use ipta terminal-tcp sendbuf-size to configure the TCP send buffer size for each terminal connection.
Use undo ipta terminal-tcp sendbuf-size to restore the default.
Syntax
ipta terminal-tcp sendbuf-size sendsize
undo ipta terminal-tcp sendbuf-size
Default
The size of the TCP send buffer for each terminal connection is 2048 bytes.
View
System view
Default command level
2: System level
Parameters
sendsize: Specifies the size of the TCP send buffer, in the range of 512 to 16384 bytes.
Examples
# Configure the TCP send buffer size for each terminal connection as 512 bytes.
<Sysname> system-view
[Sysname] ipta terminal-tcp sendbuf-size 512
listen port
Use listen port to specify the listening port of an IP terminal access service. The specified port is used by
the service to receive connection requests from terminals.