R2511-HP MSR Router Series Terminal Access Command Reference(V5)

60
screen save enable
Use screen save enable to enable screen saving for a terminal access service.
Use undo screen save enable to disable screen saving for a terminal access service.
Syntax
screen save enable
undo screen save enable
Default
Screen saving is enabled.
Views
IP terminal access service view
Default command level
2: System level
Examples
# Disable screen saving for the IP terminal access service 1.
<Sysname> system-view
[Sysname] ipta service service1
[Sysname-ipta-service-service1] undo screen save enable
screen-size
Use screen-size to set the terminal screen display size. The size determines the maximum lines (screen
height) and columns (screen width) of characters that can be displayed on the screen.
Use undo screen-size to restore the default.
Syntax
screen-size height height-in-characters width width-in-characters
undo screen-size
Default
The screen can display up to 24 lines and 80 columns of characters.
Views
IP terminal access service view
Default command level
2: System level
Parameters
height-in-characters: Specifies the screen display height, in the range of 20 to 100 characters.
width-in-characters: Specifies the screen display width, which can only be 80 or 132 characters.
Usage guidelines
You cannot modify the screen display size for IP terminals that have established connections.