R2511-HP MSR Router Series Terminal Access Command Reference(V5)

67
Syntax
terminal type { vt100 | vt220 }
undo terminal type
Default
The terminal type is VT100.
Views
IP terminal access service view
Default command level
2: System level
Parameters
vt100: Specifies the terminal type as VT100.
vt220: Specifies the terminal type as VT220.
Examples
# Configure the terminal type for service1 as VT220.
<Sysname> system-view
[Sysname] ipta service service1
[Sysname-ipta-service-service1] terminal type vt220
timer idle-timeout
Use timer idle-timeout to set the link disconnection timer or link lock timer.
Use undo timer idle-timeout to restore the default.
Syntax
timer idle-timeout seconds { disconnect | lock }
undo timer idle-timeout { disconnect | lock }
Default
The link disconnection timer is 0 seconds and the link lock timer is 600 seconds.
Views
IP terminal access service view
Default command level
2: System level
Parameters
seconds: Specifies the timeout time, in the range of 0 to 7200 seconds. If the value is set to 0, the
corresponding link lock or link disconnection function is disabled.
disconnect: Sets the link disconnection timer.
lock: Sets the link lock timer.
Usage guidelines
If the link lock timer expires and the authentication mode on the router is set to scheme or password, a
new authentication interface replaces the service interface on the corresponding terminal. If the link lock