R2511-HP MSR Router Series Terminal Access Command Reference(V5)

4
Use undo data read block to restore the default.
Syntax
data read block
undo data read block
Default
Data read blocking is disabled.
Views
Terminal template view
Default command level
2: System level
Usage guidelines
With data read blocking enabled, when the router fails to send data received from the terminal, the
router stops receiving data from the terminal until the data is successfully sent.
Examples
# Enable data read blocking.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] data read block
data send delay
Use data send delay to set the data send delay for a terminal.
Use undo data send delay to restore the default.
Syntax
data send delay milliseconds
undo data send delay
Default
The data send delay is 0 milliseconds. That is, there is no data send delay.
Views
Terminal template view
Default command level
2: System level
Parameters
milliseconds: Specifies the data send delay in the range of 1 to 1000 milliseconds,.
Usage guidelines
A router configured with data send delay begins to send the data received from a terminal to an FEP
when the configured data send delay time expires.
Examples
# Set the data send delay time to 50 milliseconds.