R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

101
Figure 17 Network diagram
Configuration procedure
1. Configure the router (initiator):
# Enable IP terminal access.
<Sysname> system-view
[Sysname] ipta server enable
# Configure Terminal A.
[Sysname] ipta terminal 1
[Sysname-ipta-terminal-1] ip 1.1.1.2 mac 11e0-fc12-433b
[Sysname-ipta-terminal-1] telnet negotiation enable
[Sysname-ipta-terminal-1] transform enter cr
# Enable filtering of flow control characters (optional).
[Sysname-ipta-terminal-1] filter flow-control character
[Sysname-ipta-terminal-1] quit
Configure Terminal B, Terminal C, and Terminal D in the same way.
# Configure the IP address of the dialer interface.
[Sysname] interface dialer 0
[Sysname-Dialer0] ip address 6.6.1.1 255.255.255.0
[Sysname-Dialer0] quit
# Configure the duigong service.
[Sysname] ipta service duigong
[Sysname-ipta-service-duigong] service type tty
[Sysname-ipta-service-duigong] server ip 2.2.2.2 port 9010
[Sysname-ipta-service-duigong] listen port 1024
[Sysname-ipta-service-duigong] terminal 1 to 4
# Disable screen saving (optional).
[Sysname-ipta-service-duigong] undo screen save enable
Dialer
6.6.1.1/24
Unix server
Eth1/1
2.2.2.1/16
2.2.2.2/16
Router
Eth1/2
1.1.1.1/16
Eth1/2
Eth1/3
Eth1/4
Terminal A
Terminal B Terminal C Terminal D
Eth1/5
1.1.1.2/16 1.1.1.3/16 1.1.1.4/16 1.1.1.5/16