R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

12
Number Item Descri
p
tion
1 Maximum number of TTYs
255. This number is subject to the number of
router interfaces available for terminal
access.
2 Maximum number of APPs 2040.
3
Maximum number of VTYs supported by each
TTY
8.
4
Maximum number of peer terminals
supported by UDP_1N_Server
10.
Terminal access receiving FEP specifications
Number Item Descri
p
tion
1
Maximum number of VTYs
supported by a Unix FEP
256
2
Maximum number of VTYs
supported by a Linux FEP
4096
3
Maximum number of VTYs
supported by an AIX FEP
8192
4 Supported Unix/Linux versions
• SCO OpenServer 5.0.5 to 5.0.7
• SCO UnixWare 7.1 (only for the one-to-one mode)
• Sun OS 5.7
• IBM AIX 4.3.3
• HP UX 10.20, 11.0
• Red Hat Linux 9.0
• Turbo Linux
• Redflag Linux
• Redhat
Relay server specifications
Number Item Descri
p
tion
1 Maximum number of forwarding groups supported by a TCP_N1_Server 64
2
Maximum number of TCP_11_Clients supported by each forwarding
group of a TCP_N1_Server
10
Terminal access configuration task list
Configure the initiator and the receiver as required. RTC terminal access is initiated and received by
routers. TTY terminal access, Telnet terminal access, ETelnet terminal access, and SSH terminal access
are initiated by a router and received by a FEP.
Functionally, the configuration commands fall into these types:
• Basic configuration commands—Used for normal operation of terminal access.