R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

13
• Advanced configuration commands—Used for implementing the extended functions of terminal
access.
• Display and maintenance commands—Used for displaying and debugging terminal access.
The configuration commands can be classified into the commands available in user view, system view,
template view, and interface view. Most important configurations of the terminal access system are
performed in templates. You can save a series of router parameter configurations into a template. When
applying a template to an interface (an asynchronous interface, for example), the system creates a TTY
according to the contents of the template and the specified terminal number, and sets up VTYs on the
basis of the configuration information in the template. If you modify a template that has been applied to
an interface, use the update changed-config command to update the configuration. For convenience,
you can configure multiple templates at the same time and apply the templates on different interfaces.
Note that only one template can be applied on each interface.
Complete the following tasks to configure terminal access:
Task Remarks
Configuring TTY
terminal access
Configuring the TTY initiator Optional.
Configuring the TTY receiver Optional.
Configuring Telnet
terminal access
Configuring the Telnet initiator Optional.
Configuring the Telnet receiver Optional.
Configuring ETelnet
terminal access
Configuring the ETelnet initiator Optional.
Configuring the ETelnet receiver Optional.
Configuring SSH
terminal access
Configuring the SSH initiator Optional.
Configuring the SSH receiver Optional.
Configuring RTC
terminal access
Configuring the asynchronous TCP RTC one-to-one initiator
(TCP
_11_Client)
Optional.
Configuring the asynchronous TCP RTC one-to-one receiver
(TCP_11_Server)
Optional.
Configuring the TCP RTC many-to-one relay server
(TCP_n1_Server)
Optional.
Configuring the synchronous UDP RTC one-to-one initiator
(UDP_11_Client)
Optional.
Configuring the synchronous UDP RTC one-to-one receiver
(UDP_11_Server)
Optional.
Configuring the synchronous UDP RTC one-to-many receiver
(UDP_1n_Server)
Optional.
Configuring TTY terminal access
Configuring the TTY initiator
Basic TTY initiator configuration