R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

16
Ste
p
Command Remarks
11. Enable terminal data read
blocking.
data read block
Optional.
Disabled by default.
12. Configure the terminal data
send delay.
data send delay milliseconds
Optional.
0 milliseconds by default. That is, there
is no send delay.
13. Configure the router to not
clear the terminal receive
buffer after the TCP
connection is established.
driverbuf save
Optional.
By default, the router clears the terminal
receive buffer after the TCP connection is
established.
14. Configure the terminal
receive buffer size.
driverbuf size size
Optional.
8 KB by default.
15. Enable filtering of flow
control characters.
filter flow-control character
Optional.
Disabled by default.
16. Configure the TCP
connection idle timeout
time.
idle-timeout seconds
Optional.
By default, the connection never times
out.
17. Configure the menu hotkey.
menu hotkey ascii-code&<1-3>
Optional.
Not configured by default.
Use the
print menu
command before
using this command.
18. Configure a screen code
for the menu screen.
menu screencode string
Optional.
Not configured by default.
Use the
print menu
command before
using this command.
19. Configure the print
language.
print language { chinese |
english }
Optional.
Chinese by default.
20. Enable the router to print
information on the terminal.
print information
Optional.
Enabled by default.
21. Enable printing of terminal
connection information on
the terminal.
print connection-info
Optional.
By default, terminal connection
information is printed on the terminal.
Use the print menu command before
using this command.
22. Enable printing of menu
information on the terminal.
print menu
Optional.
Enabled by default.
Use the print information command
before using this command.
23. Configure the VTY
redrawing hotkey.
redrawkey ascii-code&<1-3>
Optional.
Not configured by default.
24. Configure the terminal reset
hotkey.
resetkey ascii-code&<1-3>
Optional.
Not configured by default.