R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

22
Ste
p
Command Remarks
13. Configure the TCP
connection idle timeout
time.
idle-timeout seconds
Optional.
0 seconds by default. That is, the
connection never times out.
14. Configure the menu
hotkey.
menu hotkey ascii-code&<1-3>
Optional.
Not configured by default.
Configure menu printing before
configuring the menu hotkey.
15. Configure a screen code
for the menu screen.
menu screencode string
Optional.
Not configured by default.
16. Enable printing of
terminal connection
information on the
terminal.
print connection-info
Optional.
By default, terminal connection
information is printed on the terminal.
Use the print information command
before using this command.
17. Enable the router to print
information on the
terminal.
print information
Optional.
By default, the router prints information
on the terminal.
18. Enable printing of menu
information on the
terminal.
print menu
Optional.
By default, the menu is printed on the
terminal.
Use the print information command
before using this command.
19. Configure the print
language.
print language { chinese | english }
Optional.
Chinese by default.
20. Set the terminal reset
hotkey.
resetkey ascii-code&<1-3>
Optional.
Not configured by default.
21. Configure the maximum
size of data to be sent at
one time.
sendbuf bufsize size
Optional.
500 bytes by default.
22. Configure the terminal
send buffer threshold.
sendbuf threshold value
Optional.
Not configured by default.
23. Set the terminal
connectivity test hotkey.
testkey ascii-code&<1-3>
Optional.
Not configured by default.
24. Configure TCP
parameters.
tcp { recvbuf-size recvsize |
sendbuf-size sendsize | nodelay |
keepalive time count }
Optional.
By default, the receive buffer size is
2048 bytes, the send buffer size is 2048
bytes, delay is enabled, keepalive
interval is 50 seconds, and the keepalive
number is 3.
25. Configure a description
for a VTY.
vty vty-number description string
Optional.
Not configured by default.