R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

27
Ste
p
Command Remarks
6. Configure the automatic
link establishment time.
auto-link time
Optional.
0 seconds by default. That is, no
automatic link establishment is
performed.
7. Bind a VPN instance.
bind vpn-instance vpn-name
Optional.
Not configured by default.
8. Enable terminal data read
blocking.
data read block
Optional.
Disabled by default.
9. Configure the terminal data
send delay.
data send delay milliseconds
Optional.
0 milliseconds by default. That is, there
is no send delay.
10. Configure the router to not
clear the terminal receive
buffer after a TCP
connection is established.
driverbuf save
Optional.
By default, the router clears the terminal
receive buffer after a TCP connection is
established.
11. Configure the terminal
buffer size.
driverbuf size number
Optional.
8192 bytes by default.
12. Enable filtering of flow
control characters.
filter flow-control character
Optional.
Disabled by default.
13. Configure the TCP
connection idle timeout
time.
idle-timeout seconds
Optional.
0 seconds by default and the connection
never times out.
14. Configure the menu hotkey.
menu hotkey ascii-code&<1-3>
Optional.
Not configured by default.
Configure menu printing before
configuring the menu hotkey.
15. Configure a screen code
for the menu screen.
menu screencode string
Optional.
Not configured by default.
16. Enable printing of terminal
connection information on
the terminal.
print connection-info
Optional.
By default, terminal connection
information is printed on the terminal.
Use the print information command
before using this command.
17. Configure the router to print
information on the terminal.
print information
Optional.
By default, the router prints information
on the terminal.
18. Enable printing of menu
information on the terminal.
print menu
Optional.
By default, the menu is printed on the
terminal.
Use the print information command
before using this command.