R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

32
To configure advanced SSH initiator settings:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Configure the global source IP
address of TCP connections.
rta source-ip ip-address
Optional.
Not configured by default.
3. Enable pressing any key to
return.
rta vty-style smart
Optional.
Disabled by default.
4. Enter terminal template view.
rta template template-name N/A
5. Configure the automatic link
teardown time.
auto-close time
Optional.
0 seconds by default. That is, no
automatic link teardown is
performed.
6. Configure the automatic link
establishment time.
auto-link time
Optional.
0 seconds by default. That is, no
automatic link establishment is
performed.
7. Bind a VPN instance.
bind vpn-instance vpn-name
Optional.
Not configured by default.
8. Enable terminal data read
blocking.
data read block
Optional.
Disabled by default.
9. Configure the terminal data
send delay.
data send delay milliseconds
Optional.
0 milliseconds by default. That is,
there is no send delay.
10. Configure the router to not
clear the terminal receive
buffer after a TCP connection
is established.
driverbuf save
Optional.
By default, the router clears the
terminal receive buffer after a TCP
connection is established.
11. Configure the terminal buffer
size.
driverbuf size number
Optional.
8192 bytes by default.
12. Enable filtering of flow control
characters.
filter flow-control character
Optional.
Disabled by default.
13. Configure the TCP connection
idle timeout time.
idle-timeout seconds
Optional.
0 seconds by default and the
connection never times out.
14. Configure the menu hotkey.
menu hotkey ascii-code&<1-3>
Optional.
Not configured by default.
You must configure menu printing
before configuring the menu hotkey.
15. Configure a screen code for
the menu screen.
menu screencode string
Optional.
Not configured by default.