R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

38
Ste
p
Command Remarks
6. Configure the automatic
link establishment time.
auto-link time
Optional.
0 seconds by default. That is, no
automatic link establishment is
performed.
7. Bind a VPN instance to the
template.
bind vpn-instance vpn-name
Optional.
Not configured by default.
8. Enable terminal data read
blocking.
data read block
Optional.
Disabled by default.
9. Configure the data send
delay.
data send delay milliseconds
Optional.
0 milliseconds by default. That is, there
is no send delay.
10. Configure the router to not
clear the terminal buffer
after a TCP connection is
established.
driverbuf save
Optional.
By default, the router clears the terminal
receive buffer after a TCP connection is
established.
11. Configure the terminal
receive buffer size.
driverbuf size size
Optional.
8192 bytes by default.
12. Configure the TCP
connection idle timeout
time.
idle-timeout seconds
Optional.
0 seconds by default and the connection
never times out.
13. Enable printing of terminal
connection information on
the terminal.
print connection-info
Optional.
By default, terminal connection
information is printed on the terminal.
Use the print information command
before using this command.
14. Configure the router to print
information on the terminal.
print information
Optional.
By default, the router prints information
on the terminal.
15. Configure the print
language.
print language { chinese |
english }
Optional.
Chinese by default.
16. Set the terminal reset
hotkey.
resetkey ascii-code&<1-3>
Optional.
Not configured by default.
17. Configure the maximum
size of data sent by the
terminal send buffer at one
time.
sendbuf bufsize size
Optional.
500 bytes by default.
18. Configure the terminal
send buffer threshold.
sendbuf threshold value
Optional.
Not configured by default.