R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

44
Ste
p
Command Remarks
2. Enable terminal access.
rta server enable Disabled by default.
3. Create a terminal template
and enter terminal template
view.
rta template template-name N/A
4. Create a UDP RTC client VTY.
vty vty-number rtc-client remote
ip-address remote-port
remote-port-number udp [ local-port
local-port-number ] [ source
source-ip-address ]
After this configuration, you
cannot configure other types
of VTYs in the template.
5. Return to system view.
quit N/A
6. Enter interface view.
interface interface-type interface-number
N/A
7. Configure the protocol type of
the synchronous serial
interface as HDLC.
link-protocol hdlc
By default, a serial interface
operates in the PPP protocol
mode.
8. Apply the template to the
interface.
rta terminal template-name
terminal-number [ backup ]
N/A
Configuring the synchronous UDP RTC one-to-one receiver
(UDP_11_Server)
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Enable terminal access.
rta server enable N/A
3. Create a terminal template
and enter terminal template
view.
rta template template-name N/A
4. Create a UDP RTC server VTY.
vty vty-number rtc-server remote
[ ip-address remote-port
remote-port-number ] udp
local-port local-port-number
[ source source-ip-address ]
After this configuration, you cannot
configure other types of VTYs in the
template.
5. Quit terminal template view.
quit N/A
6. Enter interface view.
interface interface-type
interface-number
N/A
7. Configure the protocol type of
the synchronous serial
interface as HDLC.
link-protocol hdlc
By default, a serial interface
operates in the PPP protocol mode.
8. Apply the template to the
interface.
rta terminal template-name
terminal-number [ backup ]
N/A