R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

Asynchronous RTC VPNs configuration example

Network Requirements

As shown in Figure 9, terminal CE A in the monitoring center and remote terminal CE B are in MPLS

L3VPN VPNA and connected to the interface Async 1/0 on PE A and PE B respectively. Configure

monitor CE B in real time through CE A.

• The terminal numbers of PE A and PE B are 2.

• The listening port of the RTC server is 9000.

Figure 9 Network diagram

Configuration procedure

1. Configure the RTC server:

# Configure MPLS L3VPN. For more information, see MPLS Configuration Guide.

# Bind Loopback 1 to VPNA.

[PEB] interface loopback 1

[PEB-LoopBack1] ip binding vpn-instance vpna

[PEB-LoopBack1] ip address 169.254.3.1 32

[PEB-LoopBack1] quit

# Enable terminal access.

[PEB] rta server enable

# Configure the listening port number of the RTC server.

[PEB] rta rtc-server listen-port 9000

# Configure the terminal template.

[PEB] rta template rtcs

# Configure VTY 0 on the RTC server.

[PEB-rta-template-rtcs] vty 0 rtc-server remote 169.254.2.1 2

# Bind the VPN instance to the template.

[PEB-rta-template-rtcs] bind vpn-instance vpna

[PEB-rta-template-rtcs] quit

# Configure interface async 1/0.

[PEB] interface async 1/0

[PEB-Async1/0] async mode flow

[PEB-Async1/0] rta terminal rtcs 2