R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

66
Total number of bytes read from socket: 4
Number of bytes last read from socket: 1
Time when socket was last read?2002-07-15 13:59:43
Total number of packets written to socket: 2
Total number of bytes written to socket: 116
Number of bytes last written to socket: 58
Time when socket was last written to? 2002-07-15 13:59:44
Total number of packets read from pty: 2
Total number of bytes read from pty: 116
Number of bytes last read from pty: 58
Time when pty was last read?2002-07-15 13:59:44
Total number of packets written to pty: 2
Total number of bytes written to pty: 2
Number of bytes last written to pty: 1
Time when pty was last written to? 2002-07-15 13:59:43
Press <Enter> to return.
Editing ttyd configuration file
On the main interface, select option 6 and the system prompts you for the configuration file name. If the
specified configuration file exists, the file is opened. If you specify a new configuration file name, a
configuration file template is opened.
Installing and configuring SCO UnixWare server
You can choose to install device drivers using a floppy disk or FTP.
Installing device drivers
Using the floppy disk
For more information, see "Using a floppy disk."
."
Using FTP
For more information, see "Using FTP."
Configuration prerequisites
Adding pseudo terminals
When you need to add the number of pseudo terminals on the SCO UnixWare server, use the scoadmin
configuration program to add pseudo terminals as follows:
1. Launch scoadmin.
2. Select [Networking].
3. Select [Network Configuration Manager].
4. Select [TCP/IP].
5. Select [Protocol].
6. Select [Modify protocol configuration...].