R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

data seg size (kbytes, -d) unlimited

file size (blocks, -f) unlimited

max locked memory (kbytes, -l) 4

max memory size (kbytes, -m) unlimited

open files (-n) 2048

pipe size (512 bytes, -p) 8

stack size (kbytes, -s) 10240

cpu time (seconds, -t) unlimited

max user processes (-u) 4096

virtual memory (kbytes, -v) unlimited

Editing the ttyd configuration file

For more information, see "Editing the ttyd configuration file."

Modifying route configuration file

The terminal access router is usually connected to the Unix server through WANs and therefore located

on an IP segment different from that of the Unix server, in which case you must configure a route on the

Unix server.

The following example shows how to do this:

# route add net 10.110.96.0 netmask 255.255.255.0 63.1.1.250

In the example above, 10.110.96.0 is the destination subnet, with the subnet mask of 255.255.255.0 and

the gateway (a router) IP address of 63.1.1.250.

Running and terminating ttyd on Unix server

Running ttyd

For more information, see "Running ttyd."

Terminating ttyd

For more information, see "Terminating ttyd."

Installing and using ttyd administration program ttyadm

For more information, see "Installing and using ttyd administration program ttyadm."