R2511-HP MSR Router Series Terminal Access Configuration Guide(V5)

94
Ste
p
Command Remarks
3. Bind an IP address or an IP
address and MAC address to
the terminal.
ip ip-address [ mac mac-address ]
By default, no IP or MAC address
is bound to the terminal.
Configuring server connection authentication
This feature is supported by TTY terminal access only.
To configure server connection authentication:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Specify the MAC address or
string for server connection
authentication.
ipta bind { mac-address interface
interface-type interface-number |
string string }
By default, no authentication is
performed between the router and
a receiver.
Setting the terminal timeout lock timer
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IPTA service view.
ipta service service-name N/A
3. Set the terminal timeout lock
timer for the service.
timer idle-timeout seconds lock 600 seconds by default.
Specifying terminal lock hotkeys
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Specify IP terminal lock
hotkeys.
ipta lock-key ascii-cod &<1-3> Not specified by default.
Setting the terminal timeout disconnection timer
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IPTA service view.
ipta service service-name N/A
3. Set the terminal timeout
disconnection timer.
timer idle-timeout seconds
disconnect
0 seconds by default.
Configuring manual link disconnection