R2511-HP MSR Router Series Voice Command Reference(V5)

99
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer dial-interval 5
timer disconnect-pulse
Use timer disconnect-pulse to configure the time duration for the sending of the pulse signals at hangup.
Use undo timer disconnect-pulse to restore the default setting.
Syntax
timer disconnect-pulse milliseconds
undo timer disconnect-pulse
Views
FXS voice subscriber line view
Default Level
2: System level
Parameters
milliseconds: Time duration (in milliseconds) for the sending of the pulse signals at hangup. The value is
in the range 0 to 1500, and defaults to 750.
Examples
# Configure the time duration for the sending of the pulse signals at hangup on the FXS voice subscriber
line 5/1 as 1 second.
<Sysname> system-view
[Sysname] subscriber-line 5/1
[Sysname-subscriber-line5/1] timer disconnect-pulse 1000
timer first-dial
Use timer first-dial to configure the maximum interval between off-hook and dialing the first digit.
Use undo timer first-dial to restore the default setting.
Syntax
timer first-dial seconds
undo timer first-dial
Default
The maximum interval between off-hook and dialing the first digit is 15 seconds.
Views
FXS voice subscriber line view, FXO voice subscriber line view
Default command level
2: System level
Parameters
seconds: Maximum interval in seconds between off-hook and dialing the first digit, in the range of 1 to
300.