R2511-HP MSR Router Series Voice Command Reference(V5)

100
Usage guidelines
Upon the expiration of the timer, the subscriber will be prompted to hook up and the call will be
terminated.
Examples
# Set the maximum interval between off-hook and dialing the first digit to 10 seconds.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer first-dial 15
timer hookflash-detect
Use timer hookflash-detect to configure the time range for the duration of an on-hook condition that will
be detected as a hookflash.
Use undo timer hookflash-detect to restore the default.
Syntax
timer hookflash-detect hookflash-range
undo timer hookflash-detect
Default
The time range is 50 to 180 milliseconds. If an on-hook condition that lasts for a period that falls within
the hookflash duration range is considered a hookflash.
Views
Analog FXS subscriber line view
Default command level
2: System level
Parameters
hookflash-range: Hookflash duration range in milliseconds, in the range of 50 to 1200.
Examples
# Set the hookflash duration range for voice subscriber line 1/0 to 100 to 200 milliseconds.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer hookflash-detect 100-200
timer hookoff-interval
Use timer hookoff-interval to configure the interval between on-hook and off-hook.
Use undo timer hookoff-interval to restore the default.
Syntax
timer hookoff-interval milliseconds
undo timer hookoff-interval
Default
The interval between on-hook and off-hook is 500 milliseconds.