R2511-HP MSR Router Series Voice Command Reference(V5)

102
timer wait-digit
Use timer wait-digit to configure the maximum time duration the system waits for a digit.
Use undo timer wait-digit to restore the default time settings.
Syntax
timer wait-digit { seconds | infinity }
undo timer wait-digit
Default
The maximum time duration the system waits for a digit is 5 seconds.
Views
E&M voice subscriber line view
Default command level
2: System level
Parameters
seconds: Maximum duration in seconds the system waits for a digit, in the range of 3 to 600.
infinity: Infinite time.
Examples
# Set the maximum duration waiting for the first dial on voice line 5/0 to 5 seconds.
<Sysname> system-view
[Sysname] subscriber-line 5/0
[Sysname-subscriber-line5/0] timer wait-digit 5
transmit gain
Use transmit gain to set the voice subscriber line output end gain value.
Use undo transmit gain to restore the default value.
Syntax
transmit gain value
undo transmit gain
Default
The output gain on the voice interface is 0 dB.
Views
FXS voice subscriber line view, FXO voice subscriber line view, E&M voice subscriber line view, BSV voice
subscriber line view
Default command level
2: System level
Parameters
value: Voice output gain in dB, in the range of -14.0 to 13.9 (accurate to one decimal place).