R2511-HP MSR Router Series Voice Command Reference(V5)

106
time1: Make time for the first make-to-break ratio in milliseconds, in the range of 30 to 8192. In the case
of continuous play, the value is 8192.
time2: Break time for the first make-to-break ratio in milliseconds, 30 through 8191.
time3: Make time for the second make-to-break ratio in milliseconds, 30 through 8191.
time4: Break time for the second make-to-break ratio in milliseconds, 30 to 8191.
Usage guidelines
After configuring parameters for a customized call progress tone, issue the cptone country-type CS
command in voice view for the configuration to take effect.
Example
# Customize parameters for a busy tone, with the two frequencies both being 425 Hz, and the make time
and break time both being 350 milliseconds.
<sysname> system-view
[sysname] voice-setup
[sysname-voice] vi-card cptone-custom busy-tone 0 425 425 350 350 350 350
vi-card reboot
Use vi-card reboot to reboot a voice card.
Syntax
vi-card reboot slot-number
Views
Voice view
Default command level
2: System level
Parameters
slot-number: Number of the slot where the voice card is located.
Usage guidelines
To locate a voice card, use the display version or display device command to show the slot in which the
voice card resides.
The vi-card reboot command can be used to reboot all analog voice cards (including FXS, FXO, and
E&M), SIC-AUDIO, and BSV.
The SIC digital voice cards and VE1 and VT1 voice cards cannot be rebooted by using commands.
Use the reboot slot slot-number command to reset the analog voice card of FIC. For more information
about the reboot slot command, see Fundamentals Command Reference.
Examples
# Reset the voice card in slot 3.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] vi-card reboot 3
Related commands
• display version