R2511-HP MSR Router Series Voice Command Reference(V5)

118
Signal Default rx-bits ABCD Default tx-bits ABCD
Release-guard 1001 1001
Usage guidelines
You can use this command to accommodate to the ABCD bit pattern schemes used in different countries.
Examples
# Set the ABCD bit pattern to 1101 for received R2 idle signal, and to 1011 for transmitted R2 idle signal.
<Sysname> system-view
[Sysname] controller e1 1/0
[Sysname-e1 1/0] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-e1 1/0] cas 0
[Sysname-cas1/0:0] dl-bits idle received 1101
[Sysname-cas1/0:0] dl-bits idle transmit 1011
Related commands
• seizure-ack enable
• answer enable
dtmf enable
NOTE:
This command applies to R2 signaling only.
Use dtmf enable to set the way receiving and transmitting R2 signals to DTMF mode.
Use undo dtmf enable to restore the default.
Syntax
dtmf enable
undo dtmf enable
Default
Multifrequency compelled (MFC) mode is adopted.
Views
R2 CAS view
Default command level
2: System level
Examples
# Adopt DTMF mode to receive and send R2 signals.
<Sysname> system-view
[Sysname] controller e1 1/0
[Sysname-e1 1/0] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-e1 1/0] cas 0
[Sysname-cas1/0:0] dtmf enable