R2511-HP MSR Router Series Voice Command Reference(V5)

138
Default command level
2: System level
Parameters
slot-number: Number of the voice subscriber line automatically created upon creation of a TS set or ISDN
PRI group.
ts-set-number: Number of the TS set that has been created.
15: Indicates the subscriber line is created for the ISDN PRI group created on an E1 interface.
23: Indicates the subscriber line is created for the ISDN PRI group created on a T1 interface.
Usage guidelines
Upon creation of a TS set on an E1/T1 interface, the system automatically creates a logical voice
subscriber line numbered in the form of E1/T1 interface number:TS set number. On the voice subscriber
line, you can configure signaling and other voice functions for the corresponding E1/T1 line. Note that
on each E1/T1 interface you can create only one TS set.
After you create a PRI group with the pri-set command on an E1/T1 interface, a voice subscriber line is
automatically created. This line is numbered E1 interface-number:15 on an E1 interface and T1
interface-number:23 on a T1 interface.
Examples
# Enter the view of voice subscriber line 1/0:15.
<Sysname> system-view
[Sysname] subscriber-line 1/0:15
[Sysname-subscriber-line1/0:15]
Related commands
• timeslot-set
• pri-set
tdm-clock
Use tdm-clock to set the TDM clock source for an E1/T1 interface.
Use undo tdm-clock command to restore the default.
Syntax
tdm-clock { internal | line [ primary ] }
undo tdm-clock
Default
The TDM source clock for E1 interfaces is the internal clock.
Views
E1 interface view, T1 interface view
Default command level
2: System level