R2511-HP MSR Router Series Voice Command Reference(V5)

147
query: Queries status of the circuits of specified timeslots to see whether the circuits are busy, open, or
blocked in real time.
reset: Resets the circuits of specified timeslots when they cannot automatically reset. You might need to do
this if the state of an administratively blocked or opened circuits cannot recover for example.
timeslots timeslots-list: Specifies a timeslot range. Timeslots are numbered 1 through 31 for an E1
interface and 1 through 24 for a T1 interface. You can specify a single timeslot by specifying a number,
a range of timeslots by specifying a range in the form of number1-number2, or several discrete timeslots
by specifying number1, number2-number3. Examples are 1-14, 15, 17-31.
Usage guidelines
The ts query command is available in R2 CAS view, digital E&M CAS view, and digital LGS CAS view.
Examples
# Reset the circuits of timeslots 1 through 15 in TS5 and query the status of the circuits of TS1 through
TS31.
<Sysname> system-view
[Sysname] controller e1 1/0
[Sysname-e1 1/0] timeslot-set 5 timeslot-list 1-31 signal r2
[Sysname-e1 1/0] cas 5
[Sysname-cas1/0:5] ts reset timeslots 1-15
[Sysname-cas1/0:5] ts query timeslots 1-31
Related commands
cas