R2511-HP MSR Router Series Voice Command Reference(V5)

159
max-call (voice entity view)
Use max-call to bind the maximum-call-connection set to a voice entity.
Use undo max-call to remove the binding. You can bind each voice entity to only one
maximum-call-connection set.
Syntax
max-call set-number
undo max-call
Default
No maximum-call-connection set is bound to the voice entity..
Views
POTS voice entity view, VoIP voice entity view, VoFR voice entity view, IVR voice entity view
Default command level
2: System level
Parameters
set-number: Number identifying a maximum-call-connection set (number of the maximum-call-connection
set configured in voice dial program view), in the range of 1 to 2147483647.
Examples
# Bind voice entity 10 to maximum-call-connection set 1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] max-call 1 5
[Sysname-voice-dial] entity 10 voip
[Sysname-voice-dial-entity10] max-call 1
Related commands
max-call (in voice dial program view)
number-match
Use number-match to configure a global number match mode.
Use undo number-match to restore the default number match mode.
Syntax
number-match { longest | shortest }
undo number-match
Default
The shortest-number match mode is adopted.
Views
Voice dial program view