R2511-HP MSR Router Series Voice Command Reference(V5)

161
number-substitute
Use number-substitute to create a number substitution rule list and enter voice number-substitute view.
Use undo number-substitute to remove a specified number substitution rule or all number substitution rule
lists.
Syntax
number-substitute list-number
undo number-substitute { list-number | all }
Default
No number substitution rule list is configured.
Views
Voice dial program view
Default command level
2: System level
Parameters
list-number: Serial number of a number substitution rule list, in the range of 1 to 2147483647.
all: Specifies all number substitution rule lists.
Examples
# Enter the voice dial program view and create a number substitution rule list.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] number-substitute 1
[Sysname-voice-dial-substitute1]
Related commands
• rule
• substitute
priority
Use priority to configure the priority of a voice entity.
Use undo priority to restore the priority of a voice entity to the default.
Syntax
priority priority-order
undo priority
Default
The priority level is 0.
Views
POTS voice entity view, VoIP voice entity view, VoFR voice entity view, IVR voice entity view