R2511-HP MSR Router Series Voice Command Reference(V5)

169
Examples
# Configure the maximum number of voice entities found to 5.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] select-rule search-stop 5
Related commands
• select-rule rule-order
• select-rule type-first
select-rule type-first
Use select-rule type-first to configure a rule for voice entity type selection priority.
Use undo select-rule type-first to remove a rule for voice entity type selection priority.
Syntax
select-rule type-first 1st-type 2nd-type 3rd-type [ 4th-type ]
undo select-rule type-first
Default
Voice entities are not selected by type.
Views
Voice dial program view
Default command level
2: System level
Parameters
1st-type: Serial number of the type of the first priority, in the range of 1 to 4. Table 40 describes these
values:
2nd-type: Serial number of the type of the second priority, in the range of 1 to 4. The value must be
different from that of 1st-type.
3rd-type: Serial number of the type of the third priority, in the range of 1 to 4. The value must be different
from that of 1st-type and 2nd-type.
4th-type: Serial number of the type of the fourth priority, in the range of 1 to 4. The value must be different
from that of 1st-type, 2nd-type, and 3rd-type.
Table 40 Meanings of values
Value Meanin
g
1 POTS voice entity
2 VoIP voice entity
3 VoFR voice entity
4 IVR voice entity