R2511-HP MSR Router Series Voice Command Reference(V5)

170
Usage guidelines
The command is used to configure the sequence of voice entity type selection priority. If different types of
voice entities are qualified for a call connection, the system selects a suitable voice entity according to the
voice entity type selection priority rule configured by the select-rule type-first command. The order of
entering the parameters determines voice entity type priorities. The system selects the first type first, then
the second type, and the third type, finally the fourth type.
Examples
# Configure the system to select voice entities in the order of VoIP->POTS->VoFR->IVR.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] select-rule type-first 2 1 3 4
Related commands
• select-rule rule-order
• select-rule search-stop
select-stop
Use select-stop to disable the voice entity search function.
Use undo select-stop to enable the voice entity search function.
Syntax
select-stop
undo select-stop
Default
The voice entity search function is enabled.
Views
POTS voice entity view, VoIP voice entity view, VoFR voice entity view, IVR voice entity view
Default command level
2: System level
Examples
# Disable the voice entity search function for voice entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] select-stop
Related commands
• select-rule rule-order
• select-rule search-stop
• select-rule type-first