R2511-HP MSR Router Series Voice Command Reference(V5)

172
Syntax
subscriber-group list-number
undo subscriber-group { list-number | all }
Default
No subscriber group is created.
Views
Voice dial program view
Default command level
2: System level
Parameters
list-number: Subscriber group ID in the range of 1 to 2147483647.
all: Specifies all subscriber groups.
Usage guidelines
At most ten subscriber groups can be configured for the system.
Examples
# Enter voice dial program view and create a subscriber group.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] subscriber-group 1
[Sysname-voice-dial-group1]
Related commands
• description
• match-template
substitute (voice subscriber line view, voice entity view)
Use substitute to bind a calling/called number substitution rule list to the voice subscriber line or voice
entity.
Use undo substitute to remove the binding between a calling/called number substitution rule list and the
voice subscriber line or voice entity.
Syntax
substitute { called | calling } list-number
undo substitute { called | calling }
Default
No number substitution rule list is bound to a voice subscriber line or voice entity. That is to say, no
number substitution is performed.
Views
POTS voice view, VoIP voice view, VoFR voice view, subscriber line voice entity view