Manualshelf

R2511-HP MSR Router Series Voice Command Reference(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router
11121314151617181920
9
default entity payload-size
Use default entity payload-size to configure the default packetization period for a codec.
Use undo default entity payload-size to restore the default.
Syntax
default entity payload-size { g711 | g723 | g726r16 | g726r24 | g726r32 | g726r40 | g729 }
time-length
undo default entity payload-size { g711 | g723 | g726r16 | g726r24 | g726r32 | g726r40 | g729 }
Views
Voice dial program view
Default command level
2: System level
Parameters
g711: Specifies the packetization period for g711 codec. It can be 10, 20 (the default), or 30
milliseconds.
g723: Specifies the packetization period for g723 codec. It is an integral multiple of 30 in the range of
30 to 180 milliseconds. It defaults to 30 milliseconds.
g726r16: Specifies the packetization period for g726r16 codec, in the range of 10 to 110 milliseconds
and defaulting to 30 milliseconds.
g726r24: Specifies the packetization period for g726r24 codec, in the range of 10 to 70 milliseconds
and defaulting to 30 milliseconds.
g726r32: Specifies the packetization period for g726r32 codec, in the range of 10 to 50 milliseconds
and defaulting to 30 milliseconds.
g726r40: Specifies the packetization period for g726r40 codec, in the range of 10 to 40 milliseconds
and defaulting to 30 milliseconds.
g729: Specifies the packetization period for g729 codec, in the range of 10 to 180 milliseconds and
defaulting to 30 milliseconds.
time-length: Packetization period for a codec.
Usage guidelines
Because the IVR voice entity does not support g726 codecs, the packetization periods configured for
g726 codecs on an IVR voice entity take no effect. For more information about the IVR voice entity, see
Voice Configuration Guide.
The packetization periods configured for different codecs (configured with the payload-size command)
on an IVR voice entity take effect to media files, and take no effect to MOH audio input ports.
Related commands
• payload-size
• default entity compression
• entity compression
• set-media