R2511-HP MSR Router Series Voice Command Reference(V5)

188
Usage guidelines
If you configure the destination port in the address sip { dns domain-name [ port port-number ] |
enum-group group-number }, proxy dns domain-name [ port port-number ], or mwi-server dns
domain-name [ port port-number ] command, the DNS lookup mode can only be Type-A.
Examples
# Set the DNS lookup mode to SRV.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] dns-type srv
Related commands
• address sip
• proxy
• mwi-server
display voice sip register-state
Use display voice sip register-state to display status information of all user numbers to be registered on
the SIP UA.
Syntax
display voice sip register-state [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all registration status information on the SIP UA.
<Sysname> display voice sip register-state
Number Entity Registrar Server Expires Status
+-----------------------------------------------------------------------+
105 105 100.1.1.1:5060 30 login
2000 107 100.1.1.1:5060 200 online
3000 109 cc.news.com:1120 200 login