R2511-HP MSR Router Series Voice Command Reference(V5)

190
enum-group
Use enum-group to create an ENUM translation rule group.
Use undo enum-group to delete an ENUM translation rule group.
Syntax
enum-group group-number
undo enum-group { group-number | all }
Default
No ENUM translation rule group exists.
Views
Voice dial program view
Default command level
2: System level
Parameters
group-number: Number of the ENUM translation group, in the range of 1 to 15.
all: Deletes all ENUM translation rule groups.
Examples
# Create ENUM translation rule group 1 and enter the ENUM translation view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] enum-group 1
[Sysname-voice-dial-enumgroup-1]
keepalive
Use keepalive to set the keepalive mode.
Use undo keepalive to restore the default keepalive mode.
Syntax
keepalive { options [ interval seconds ] | register }
undo keepalive
Views
SIP client view
Default command level
2: System level
Parameters
options: Sets the keepalive mode to options.
interval seconds: Sets the interval for sending options packets in seconds. The value range for seconds
is 5 to 65535, and the default is 60.