R2511-HP MSR Router Series Voice Command Reference(V5)

200
SIP status code SIP status description
PSTN release cause
code
PSTN release cause
descri
p
tion
513 Message Too Large. 127 Interworking, unspecified!
600 Busy everywhere. 17 User busy!
603 Decline. 21 Call rejected!
604 Does not exist anywhere. 1
Unallocated (unassigned)
number!
606 Not acceptable. 58
Bearer capability not presently
available!
Views
SIP client view
Default command level
2: System level
Parameters
sip-code: SIP status code in the range of 400 to 699, but limited to those in Table 49.
pstn-code: PSTN release cause code in the range of 1 to 127, but limited to those in Table 48.
Examples
# Map the SIP status code to the PSTN release cause code 18.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] reason-mapping sip 486 pstn 18
register-enable
Use register-enable on to enable the SIP registrar.
Use register-enable off or undo register-enable to disable the SIP registrar.
Syntax
register-enable { off | on }
undo register-enable
Default
The SIP registrar is disabled.
Views
SIP client view
Default command level
2: System level
Parameters
on: Enables the SIP registrar.
off: Disables the SIP registrar.