R2511-HP MSR Router Series Voice Command Reference(V5)

201
Examples
# Enable the SIP registrar.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] register-enable on
redundancy mode
Use redundancy mode to set the backup mode.
Use undo redundancy mode to restore the default backup mode.
Syntax
redundancy mode { homing | parking }
undo redundancy mode
Default
The backup mode is parking.
Views
SIP client view
Default command level
2: System level
Parameters
homing: Sets the backup mode to homing.
parking: Sets the backup mode to parking.
Examples
# Set the backup mode to homing.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] redundancy mode homing
Related commands
keepalive
registrar
Use registrar to configure registrar information for the SIP UA.
Use undo registrar to remove the registrar information for the SIP UA.
Syntax
registrar { dns domain-name | ipv4 ip-address } [ port port-number ] [ expires seconds ] [ tcp | tls ]
[ scheme { sip | sips } ] [ slave ]
undo registrar ipv4 { dns | ipv4 } [ slave ]