R2511-HP MSR Router Series Voice Command Reference(V5)

202
Default
UDP is adopted.
Default
The SIP URL scheme is adopted.
Default
No registrar information is configured on the SIP UA. If you execute this command without providing the
transport layer protocol type, the UDP protocol is used during registration. If you execute this command
without providing the URL scheme, the SIP URL scheme is used.
Views
SIP client view
Default command level
2: System level
Parameters
dns domain-name: Domain name of the registrar server, which consists of character strings separated by
a dot (for example, aabbcc.com). Each separated string contains no more than 63 characters. A domain
name can include case-insensitive letters, digits, hyphens (-), underscores (_), and dots (.), with a
maximum length of 255 characters.
ipv4 ip-address: IPv4 address of the registrar.
port port-number: Specifies a port number for the registrar, in the range of 1 to 65535.
expires seconds: Specifies the aging time for registration in seconds, 60 to 65,535. If this value is not
provided, the system applies the global registration expiration time set with the timer registration expires
command in SIP client view.
tcp: Specifies TCP as the transport layer protocol to be used during UA registration. tls: Specifies TLS as
the transport layer protocol to be used during UA registration.
scheme: Specifies the URL scheme to be used during UA registration.
sip: Specifies the SIP scheme as the URL scheme. sips: Specifies the SIPS scheme as the URL scheme.
slave: Specifies the registrar as a backup server.
Usage guidelines
The transport layer protocol specified in the registrar command must have been specified with the listen
transport command. Otherwise, no register request can be initiated.
If TLS is specified in the registrar command, you also need to configure the secure sockets layer (SSL)
policy name of the client with the crypto command. Otherwise, no register request can be initiated.
Before specifying TLS as the transport layer protocol to be used during UA registration with the registrar
command, you need to configure the secure sockets layer (SSL) policy name of the client with the crypto
command. Otherwise, you cannot initiate the register request.
Use this command only when the SIP registration function is disabled.
Examples
# Configure the IP address 169.54.5.10, the port number 1120, the registration aging time 120 seconds,
and the TCP transport layer protocol for the main registrar.
<Sysname> system-view
[Sysname] voice-setup