R2511-HP MSR Router Series Voice Command Reference(V5)

218
Default
No VPN instance is configured for SIP.
Views
Voice view
Default command level
2: System level
Parameters
vpn-instance-name: Specifies a VPN instance of MPLS L3VPN, a string of 1 to 31 case-sensitive
characters.
Usage guidelines
You can configure this command only when no SIP services run.
To use source IP address binding for SIP messages, the VPN instance associated with the source interface
must be the same as the VPN instance specified in this command.
Examples
# Configure the VPN instance vpn-voice for SIP.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] vpn-instance vpn-voice
wildcard-register enable
Use wildcard-register enable to enable fuzzy telephone number registration.
Use undo wildcard-register to disable fuzzy telephone number registration.
Syntax
wildcard-register enable
undo wildcard-register
Default
Fuzzy telephone number registration is disabled.
Views
SIP client view
Default command level
2: System level
Usage guidelines
When you configure a match template in a POTS entity, you can use a number containing the wildcards
of dot (.) and T instead of using a standard E.164 number. After enabling fuzzy telephone number
registration, the router retains dots and substitutes asterisks (*) for Ts when sending REGISTER messages.
You can use this command only when the SIP registration function is disabled.
You can use fuzzy telephone number registration only when it is supported on both SIP server and
location server.