R2511-HP MSR Router Series Voice Command Reference(V5)

221
Views
Register user view
Default command level
2: System level
Parameters
username username: Username used for authentication, consisting of 1 to 63 case-sensitive characters
excluding backward slash (\) and double quotation marks (").
cipher: Specifies a ciphertext password.
simple: Specifies a plaintext password.
password: Specifies the password string. This argument is case-sensitive. If simple is specified, it must be
a string of 1 to 16 characters. If cipher is specified, it must be a string of 1 to 53 characters.
Usage guidelines
If authentication is enabled on the local SIP server, users can successfully register with the local SIP server
only after authentication information is configured for them by using the authentication command.
The password is always saved to the configuration file in cipher text, whether you specify the cipher or
simple keyword.
Examples
# Configure authentication information.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname-voice-server] register-user 1234
[Sysname-voice-server-user1234] authentication username 1234 password simple 1234
call-route
Use call-route to enter call route view.
Syntax
call-route
Views
SIP server view
Default command level
2: System level
Examples
# Enter call route view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname-voice-server] call-route
[Sysname-voice-server-route]