R2511-HP MSR Router Series Voice Command Reference(V5)

225
When the maximum registration interval configured on the voice gateway is greater than the maximum
active time configured on the local SIP server, the maximum registration interval is subject to the one
configured on the local SIP server.
Examples
# Set the maximum registration interval for user 1234 to 3,700 seconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname-voice-server] register-user 1234
[Sysname-voice-server-user1234] expires 3700
Related commands
server-bind ipv4
mode
Use mode to configure the operation mode of the server.
Use undo mode to restore the default.
Syntax
mode { alive-server | alone-server }
undo mode
Default
The server operates in the alone mode.
Views
SIP server view
Default command level
2: System level
Parameters
alive-server: Specifies the server to operate in the alive mode.
alone-server: Specifies the server to operate in the alone mode.
Usage guidelines
You can change the operation mode of the server only when the server is disabled.
Examples
# Specify the server to operate in the alive mode.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname–voice-server] mode alive-server
Related commands
server enable