R2511-HP MSR Router Series Voice Command Reference(V5)

227
port port-number: Port number of the remote server, in the range of 1 to 65535. The default port number
is 5060.
keepalive time-interval: Interval in seconds of sending OPTION messages to the remote server, in the
range of 64 to 128. The default interval is 64 seconds.
Usage guidelines
If the local SIP server operates in the alive mode, you can configure the probe remote-server ipv4
command only when the local SIP server is disabled.
Examples
# Configure the keepalive probe.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname–voice-server] probe remote-server ipv4 192.168.0.92 keepalive 100
register-user
Use register-user to create a user and enter register user view.
Use undo register-user to delete a user or all users.
Syntax
register-user tag
undo register-user { tag | all }
Default
No user is created.
Views
SIP server view
Default command level
2: System level
Parameters
tag: Globally unique user tag in the range of 1 to 2147483647.
all: Specifies all user tags.
Examples
# Create user 1234 and enter register user view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname-voice-server] register-user 1234
[Sysname-voice-server-user1234]
rule
Use rule to configure a call rule.
Use undo rule to remove a call rule.