R2511-HP MSR Router Series Voice Command Reference(V5)

230
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname-voice-server] server-bind ipv4 192.168.0.92
server enable
Use server enable to enable the local SIP server.
Use undo server enable to disable the local SIP server.
Syntax
server enable
undo server enable
Default
The local SIP server is disabled.
Views
SIP server view
Default command level
2: System level
Usage guidelines
The functions of the local SIP server can take effect only after you configure the server enable command.
To configure the server enable command on the local SIP server operating in the alone mode, you must
first configure the server-bind ipv4 command.
To configure the server enable command on the local SIP server operating in the alive mode, you must
first configure the server-bind ipv4 command and the probe remote-server ipv4 command.
Examples
# Enable the local SIP server.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname-voice-server] server-bind ipv4 100.1.1.1
[Sysname-voice-server] server enable
sip-server
Use sip-server to enter SIP server view.
Syntax
sip-server
Views
Voice view
Default command level
2: System level