R2511-HP MSR Router Series Voice Command Reference(V5)

243
Usage guidelines
If codec transparent transfer or media flow-around is enabled, the early-offer forced command does not
take effect.
Examples
# Enable DO-EO conversion on the SIP trunk device.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 1 voip
[Sysname-voice-dial-entity1] early-offer forced
Related commands
• codec transparent
• media flow-around
group-name
Use group-name to specify a name for a SIP server group.
Use undo group-name to delete the name of a SIP server group.
Syntax
group-name group-name
undo group-name
Default
A SIP server group has no name configured.
Views
Server group view
Default command level
2: System level
Parameters
group-name: Name of a SIP server group, a case-sensitive string of 1 to 127 characters, which can
include letters, digits, hyphens (-), underscores (_), and dots (.)
Usage guidelines
The name of a SIP server group identifies the SIP server group. The domain name of the carrier server is
usually used as the name of a SIP server group. If the name of a SIP server group is not configured, the
host name specified in the assign command is used to identify the group, if any; otherwise, the IP address
or domain name of the current server in the SIP server group is used to identify the group.
Examples
# Specify ITSP-A as the name for SIP server group 1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] server-group 1
[Sysname-voice-group-1] group-name ITSP-A